For Sale Online Pleaser Women's Maiden-2025 Pirate Boot,Black Leather,9 M US

Buy Pleaser Women's Maiden-2025 Pirate Boot,Black Leather,9 M US

Pleaser Women's Maiden-2025 Pirate Boot,Black Leather,9 M US Product Description:

• Size: 9

Product Description

Heel Height: Approx. 2 1/2'' Tall. This pirate boot features a pointed toe. Knee high leather boots.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
Great boots!
By DeeInHouston
I bought these for a pirate costume, and they're perfect! You can unfold them for over the knee, and they're very comfortable. In my opinion, they're a tad small, so order 1/2 size up if you can.

2 of 2 people found the following review helpful.
A great pair for anyone
By Joanna Owen
I was buying these for a costume. They are decently priced and you get a lot for your money! I found them pretty comfortable, and the heel is short enough that you can walk in them for a while without them hurting. Also, the lacing in the back of the calf helps to make them fit a wide range of sizes, and the "leather" is stiff enough that the boots don't sag on you legs. In all I love them!

2 of 2 people found the following review helpful.
Nice.
By L. Fain
These boots are so absolutely perfect that I have to convince myself every morning that I don't need to wear them on a daily basis, but mostly because I only have one pair of pants that fit inside them well. They arrived pretty quickly, and the price I thought was more than fair.

See all 16 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buying Factory-Reconditioned DEWALT DW718R Heavy-Duty 15 Amp 12-Inch Dual Bevel Sliding Compound Miter Saw

Buy Factory-Reconditioned DEWALT DW718R Heavy-Duty 15 Amp 12-Inch Dual Bevel Sliding Compound Miter Saw

Factory-Reconditioned DEWALT DW718R Heavy-Duty 15 Amp 12-Inch Dual Bevel Sliding Compound Miter Saw Product Description:

• Miter detent override cuts as close to a detent as needed to without slipping in
• Miter cam lever easier to us than turnscrew knob.
• Sliding fence with machined support promotes accuracy
• 15-amp motor, max rpm of 3,600
• Sturdy handles built into the base for a wide, secure grip

Customer Reviews

Most helpful customer reviews

19 of 21 people found the following review helpful.
Sliding Compound Miter Saw
By Robert Mc
This saw replaces a non-sliding DeWalt miter saw. It works really well, and with the wider cross cuts, it really enhances the capability. I have not yet used the left or right tilt, but I think that will be very handy. I do most of my Crown Molding cuts with the stops (purchased separatly) and it has worked very well for these. As a reconditioned saw at a good price, I can't tell it from new.

8 of 8 people found the following review helpful.
Great saw, great price!
By C. Ruffino
Let me start by stating that I've only had this unit for about 3 weeks now. I have not used it extensively, but enough to say that it's a great machine.This is the first miter saw that I've owned, and it replaces an older Delta radial arm. I've used DeWalt miter saws in a workshop where I took some classes and loved the units. They stood up well to all the student use and abuse, which speaks well to the durable construction.I purchased a reconditioned unit for a few reasons: 1) It was only about $100 more than a smaller, less capable unit. 2) I don't plan on using this in a production capacity. 3) A good friend promised to give me grief if I bought a saw that was smaller than his :-)The unit arrived in perfect condition. It's heavy, so if you have a bad back like I do, have help when the package arrives. It's ready to use right out of the box. I checked how square the unit was and the fence-to-blade measurement was dead on. The table-to-blade measurement was off by just a little bit, but was very easy to adjust.Using the saw is very nice. I'm using the DeWalt blade that came with the saw, and it cuts very cleanly. The horizontal handle is very comfortable to use. Adjusting the miter or bevel is very easy using either the locks or the free adjustment.The one down side that I found to this machine, and it's a minor point, is that the blade takes a little longer than I'd like to spin up to speed. This is a 12" blade, so it's going to take a little more torque to crank up. I find that I have to wait 3-4 seconds before the blade is running fast enough to start the cut. That doesn't sound like a lot, but that'll add up quickly when you're trying to make a bunch of cuts for molding or whatever it is you're working on. This is the reason I gave this unit 4 out of 5 stars.

11 of 14 people found the following review helpful.
Great Power Tool!
By D. Nelson
This DeWalt 12" Dual Bevel-Sliding Compound Miter Saw is the best. It "slices" the wood as if it was butter. Quick and easy. Mitering made easy with this tool. Easy to operate. This was a replacement saw from my old DeWalt 10" and I love it. I purchased it for my boyfriend because we are in the process of building a new garage and it will make it very quick and easy to cut the studs - all angles and straight! Can hardly wait to teach him how to use it! (And, yes, I'm a Female!)

See all 13 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Deals for American Audio Vlp300 Amplifier

Buy American Audio Vlp300 Amplifier

American Audio Vlp300 Amplifier Product Description:

• 300 Watts
• Daul Fans
• Compact Design
• Front LED Meters
• Compact Design; Daul Fans
• 300 Watts power
• Daul Fans, Compact Design, Front LED Meters
• Output Power: 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD / 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD / (Bridge Mode, Mono)
• 300W RMS @ 8 Ohms, 1K Hz, 1% THD
• Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
• Frequency response: (+ or -01db, @rated output Power, 8 Ohms): 20Hz-20KHz
• Damping Factor @ 8 ohm: 260; Slew Rate: 15V per usec
• Impedance: 20 Ohms balanced / 10 Ohms unbalanced
• Cooling system: 2 individual fans
• High/low pass filter; Input sensitivity selector ; Ground lift
• Dimensions: 13-1/4"L x 19"W x 1-3/4"H

Product Description

professional amplifier, 150w RMS per channel at 4 ohms, 100 w RMS per ch at 8 ohms (bridge mono, 300 w RMS per ch @ 8 ohms

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
There are better choices
By Nicholas
I'm not sure if I just got a bad unit or what, but I could not recommend this amp for any critical listener. I originally ordered it to power the center channel in my home theater (meaning I was going to run it bridged mono) but upon hooking it up I realized there was entirely too much noise (similar to ground loop hum). Thinking it was a ground loop issue I tried using a cheater plug along with plugging it into my Furman PL-8C power conditioner (which seems to destroy any noise from other components) but had no success. I decided I would try and live with it and went to play a movie. 10 minutes into it I noticed the highs were just extremely harsh and distorted. The noise I maybe could have lived with, but the distortion drew the line for me. At this point I thought maybe re-purposing it to power my rear surrounds in stereo mode instead of bridged mono would solve the issue (since I know running bridged mono tends to increase THD), but again I was disappointed when I was met with the same results.I ended up replacing it with a Dayton Audio APA150 and absolutely love it. Noise is almost decreased to the level of my Crown XLS1500 (I.E. almost non existent) and the full frequency range is reproduced faithfully. I was really rooting for this little thing since the price was GREAT for the power output, but as they say, if it looks too good to be true... If you're getting this for casual use like ambient music or outdoor party use, by all means go for it, but for a dedicated home theater/music setup, I would avoid at all costs. Just my $.02.

2 of 2 people found the following review helpful.
best amp in its class
By Joseph J. Freedman
if you are looking for a compact ,,one rack space amp ,,,you can not find a better quality little amp anywhere,, you wont be disapointed

2 of 2 people found the following review helpful.
American Audio VLP 300 Amplifier
By ewh123
I have purchased a total of 5 of these amps from Amazon, 3 on one order and 2 on other orders. I just hooked them up on 2-25-12 and had a problem with one of them. Channel A on one amp would not produce sound. All the other amps worked fine. I am still waiting on a reply from American Audio on repairs to the one amp. But the amps which worked sounded great. My system includes a Gemini preamp, Numark dual cd player, Behringer mastering sound processor, Seismic Audio speakers. After I had everything hooked up and made some basic settings on the sound processor I had great sound from these amps ( no hiss or humming at any volume level ). The cooling fans are somewhat loud but if the amps are rack mounted this will not be a problem. Its too bad one amp was defective but I bought 2 of these as spares so its just a small problem to get the one amp repaired. They appear to be built rugged, but if you plan to use these amps in a portable PA system beware, as they are somewhat heavy for their size ( 22 pounds apiece for a 150 watt, 300 watt max amp in one rack space size, I have 110 pounds of amps alone! ). I have these for my sound system at home so the weight will not be a problem for me. Overall I am pleased with the amps and hope American Audio will make warranty repairs easy. I gave a rating of 4 stars because of the one defective amp.

See all 4 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!