Buy Norcross Hawkeye D10D Depth SounderNorcross Hawkeye D10D Depth Sounder Product Description:
- Marine tool delivers instant depth updates to help keep you safe in the water
- Gives precise depth readings (in feet or meters) from 2.5 to 200 feet at speeds up to 63 miles per hour
- Incorporates an advanced three-stage depth alarm warning system with programmable shallow and deep water alarms;
- Easy touch, algorithmic, digital programming; waterproof front face, and large, , illuminated display
- Display dimensions: 1.65 x 0.85 inches (WxH); comes with a two year warranty
Product Description
The DF10D digital depth sounder with auto-ranging and auto-sensitivity features is designed to give precise depth readings from 2.5 to 200 feet at speeds up to 63 mph. The depth sounder incorporates an advanced three-stage depth alarm warning system for the user programmable shallow and deep water alarms. Keel-Offset allows readings to be adjusted for vessel draft. The 1.65" x 0.85" LCD reads depths in feet and meters, and uses SoftGlow backlighting for easy and reliable operation at night. The included transducer can be transom-mounted or glued in-hull. The Depth Sounder includes white and black Interchangeable Face Plates and Bezels. Requires a 2 1/8" Diameter Mounting Hole or can be surface mounted with the 1000-10 Surface Mount Bracket. INCLUDES: Digital Depth Sounder Display, White/Black Interchangeable Faces & Bezels, Transom/In-Hull Transducer w/ 30 Feet of Transducer Cable, All Mounting Hardware For In-Dash Display Installation and Transom/In-Hull Transducer Installation, Display Sun Cover, 2-YEAR LIMITED WARRANTY.
Customer Reviews
Most helpful customer reviews
36 of 36 people found the following review helpful.
By Grease is the Word
I fought with a Humminbird 600 for years trying to get it to read consistently. I finally gave up and bought this unit. It works 100% of the time and updates while you are underway.Pros: you can read it w/ polarized sunglasses (unlike the Humminbird); contains hardware for both in-the-hull or transom mount (the Humminbird you have to buy one model for either); large digits.Cons: It only goes to 199 feet, so if you want to anchor and you are in over 200 feet, you have no idea if you have enough anchor line -- although in inland lakes I have never been in that situation. It doesn't include a chrome bezel, but you can buy one from the Norcross site for $15.Buy it! It is a very solid unit. I couldn't be happier. In my application I'm shooting thru the hull of a fiberglass boat. The puck is held with Devcon 2-ton slow cure epoxy.
18 of 18 people found the following review helpful.
By Brian Stromberg
Large easy to read digits. Accurate even at fast speeds. The position of the transducer was more critical than anticipated. Tried the in-hull mounting option and couldn't get a reading. Mounted the tansducer on the transom and initially only got readings at slow speeds. The kit comes with angled shims to achieve the exact angle required. Once I found the sweet spot it worked like a charm. The first unit I received was defective, however customer service was exceptional and had me a new unit in no time.
16 of 16 people found the following review helpful.
By Sam Jones
I purchased this unit for our Moomba Outback boat. I found that the installation was straightforward and easy. I drilled a 2 inch hole with a hole saw beside the ignition switch to mount the unit. I attached clips to the power wires and plugged them onto the dash circuit board so that an unused accessory switch operates the unit. I used a fish wire to run the transducer lead through an existing hole in the floor (near the driver's feet)and then duct taped the transducer to the inside of the fiberglass hull underneath the front of the engine. The unit worked perfectly as soon as I launched the boat and continued to work well at any speed. I have not yet glued the transducer to the hull but plan to do so soon.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
