Buy REMANUFACTURED DISH NETWORK RECEIVER 322REMANUFACTURED DISH NETWORK RECEIVER 322 Product Description:
- Dual Tuner
- Dual Remotes
- Dual shows
Product Description
DISH 322 features two tuners for independent satellite TV viewing on two separate televisions,
all in a slim-line chassis design.
FRONT PANEL FEATURES
- Buttons: Power, Channel Up, Channel Down
- Indicator Lights<
- Green "POWER" TV1 LED indicates the TV1 tuner is on
- Blue "POWER" TV2 LED indicates the TV2 tuner is on
- IR remote sensor, IR blast emitter (TV1 only)
- Door and smart card receptacle (unused)
REAR PANEL FEATURES
- 2 satellite tuner inputs 1 UHF Pro remote antenna input
- 1 telephone jack<
- 3-prong power cord<
- TV1 Connections
- 1 set RCA-type audio/video outputs
- 1 S-video output
- 1 RF modulated output (channel 3/4)
- 1 TV antenna/cable input
- TV2 Connections
- 1 set RCA-type audio/video outputs
- 1 agile modulated output (channels 21-69;
73-125); mono audio
SPECIFICATIONS
- Dimensions (approx.): 1.75"H x 15"W x 10.625"D
- Weight (approx.): 5.25 lbs.
- Color: Matte black with silver buttons
- DISH 322 Standalone Receiver
Part number: 119941
- DISH 322-22D System (includes DISH 500
antenna and DISH Pro Twin LNBF)
Part number: 119970
Number of Satellite Tuners - 2
Independent TVs Supported - 2
Supports HDTV - No
Digital Video Recording - No
DISH Home Interactive TV - Yes
On-Screen Caller ID - Yes
Optical Digital Audio Output - No
Remotes - 2
DISH Pro Plus Compatible - Yes
Software Upgradeable via Satellite - Yes
Customer Reviews
Most helpful customer reviews
6 of 7 people found the following review helpful.
By Pileated
We've been using the 322 for about 3 years and generally speaking it has served well. It's located downstairs and controls TVs in the livingroom and in our upstairs bedroom. The signal between the receiver and the upstairs radio remote is good. Dish replaced the radio remote when it failed after about 1.5 years for free. The remotes are nicely laid out. The receiver hiccups from time to time, and that's about as specific as I can be. This is fairly high tech stuff and sometimes it seems to get a little confused. Unplugging for a few minutes usually cures this.When electrical power returns after an outage, or if the unit has been unplugged (see above), the receiver needs to reacquire satellite signals. It can take up to 10 minutes. This receiver is definitely not "green." It draws about 30 watts even when it's "off." Unplugging it when not in use invokes the reacquisition process when plugged in again. I don't like to leave everything plugged in all the time, especially since electrical storms can cause problems where I live. We switched to Dish in the first place because a storm knocked out our DirecTv dish---and they wanted hundreds just to come out and look at it. I tend to unplug things a lot now, so watching the Dish 322 reacquire the sat signals is one of life's little annoyances. If someone can offer me an Energy Star receiver I'll likely take them up on it.
0 of 0 people found the following review helpful.
By M. Bieganowski
Works as advertise. However, with the standard DishPRO dish, a second cable must be run from the dish to this box (and then a cable to the second TV). The picture on the second TV is not the greatest. I may be able to clean up the cabling after the snow melts and improve the picture.
0 of 0 people found the following review helpful.
By Gus Muller
This receiver lets you see different channels in two separate TVs and does'nt costmore with the provider (in this case DishNetwork)($5.00 if you ar'nt connected tothe phone) the second TV can be in a separate room and you control the receiver fromthere without interfering with the other TV program
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
