Buy Pencil Drawer for Desk on Metal Roller Slides - Series APencil Drawer for Desk on Metal Roller Slides - Series A Product Description:
- Vacu-form, vinyl-clad drawer front
- Mounts under 36 in., 48 in., 60 in. or 72 in. Desks
- Holds small office supplies to reduce clutter
- 3/4 extension, metal, roller slides
- 28.88 in. W x 16.75 in. D x 4.13 in. H
Product Description
Vacu-form, vinyl-clad drawer front . Mounts under 36 in., 48 in., 60 in. or 72 in. Desks . Holds small office supplies to reduce clutter . 3/4 extension, metal, roller slides . 28.88 in. W x 16.75 in. D x 4.13 in. H
Customer Reviews
Most helpful customer reviews
1 of 1 people found the following review helpful.
By Leonard Zupko
Quality (materials, look and function) is excellent. However, Quality Control seems to be lagging behind. Two issues were discovered while building the Pencil Drawer:1) Back panel: I wasn't able to tighten down a couple screws without adding some contact cement to fill in the gaps and hold the sides onto the back. As soon as I tightened to a snug fit, the screws continued to rotate (not catch on the wood). Either the screws supplies were too small or a couple holes were too large. The other two screws fit properly (4 total / 2 per side) so I'm inclined to feel that the drilled hole was a bit too big. And, no I didn't torque the screws down and strip the wood.2) Bottom panel: The panel measured at 25.25" x 13.25" x 1/8" and is designed to fit in slots on all four sides. From front to back, there was a .5" gap, and a .25" gap on the side at the back. On the front facing section, there are a couple plactic pieces, which allow for lateral adjustments, so the front was OK. I completed the assembly of the drawer to find the final dimensions needed and found that the bottom panel should have been 26.0" x 13.75" x 1/8"; and was able to find this at Home Depot.Note that if you install the drawer into the Series A corner desk, you need to first attach the drawer to it's housing (which in turn attaches to the corner desk) before mounting the housing to the desk. If you mount the housing first, you won't be able to slide the drawer in due to the angles needed to slide the drawer on to its rollers.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
